Holding The first national conference on mechanized packing of pistachio shell in Iran Esfahan . Mahabad Ardestan 1395/7/17
Mechanized pistachio skin packaging
Pistachio shell packing workshop and twigs of pistachio with accompany the honorable authorities the dairy Ministry of Jihad Agriculture
Aria Sanat Asrar Company Manufacturer of packaging machines, forage maize packaging, pistachio skin packing, etc. was present at the Tehran Animal and Food Industry Exhibition and was welcomed.
۱۳۹۶-۰۲-۱۲
/ Comments / In Training, News, Articles / By
Every year more than a fifth of the food products of Third World countries In the form of waste due to corruption caused by various physical, chemical and biological factors In steps
Different planting, growing, harvesting, after harvest, distribution and consumption are eliminated. Pistachio is one of the important agricultural products of Iran, which is According to the cultivated area its examines of the waste of this product Is very important.
Ariya Sanat Asrar Company with expert staff with a Presentation comprehensive and practical design and Along with experts supervision the Ministry of Jihad and Agriculture Produces a device for packing and mixing pistachios with other foods to prepare a new, tasty food for livestock. This fodder makes up 12% of protein with straw and concentrate a very good forage for livestock.
This product is in perfect harmony with the Resilient Economy conditions and makes pistachio waste turning into forage for livestock. This is a revolutionary product and a Insert of the animal feed industry.
This machine is fully adapted to the economy of resistance and turns pistachio waste into a complete feed. It is a revolutionary product and one of the inserts in the livestock feed industry.
1-Due to the segmentation of the weighing section from product press, the packaging speed of the machine has Increased to 3.5 packs per minute.
2-Due to separation of press parts from sewing and packaging, Excess water is completely evacuated from corn And after the packing step is done which This makes it important to prevent the formation Corruption of corn and increase the shelf-life of the product.
3-In the design and manufacture of the new MG device , the bottom of the device is a press-fitting machine that pushes the package before stitching, so that the air is completely drained and then sewn, which will improve the product and product durability.
4-The sewing system is mainly of thermal type in packaging machines Which was vertical on the previous device Which is sometimes due to the pressure of the sewing area during packing, causing problems such as the reduction of stiffness and the safety factor of the sewing point Which causes the rupture and penetration of the air in the course of time Which leads to corruption of product
which This problem was resolved with making the horizontal packaging system in the new device And the system is designed to cool down the sewing area during the packaging and exit of the machine, and no problems occur.
5-Optimized PLC system instead of LOGO in the control system and use the touch system in control instead of the keyboard.
6-Using the sensor instead of the microswitch (despite the moisture in the device there is a possibility of failure for the microswitch)
7-Using 24V instead of 360V in sewing and electrodelectric strips
8-Securing dangerous and sensitive points of the MG device with metallic guards
9-Use the conveyor system at the bottom of the MG device to transport the packages to the warehouse