Holding The first national conference on mechanized packing of pistachio shell in Iran Esfahan . Mahabad Ardestan 1395/7/17
Mechanized pistachio skin packaging
Hello dear friends Arya sanat asrar Company has launched a new animal feed packaging machine production line in Isfahan province of Mahabad and congratulating all of my dear colleagues in this company.
This type of machine is used to fill products such as yogurt, cream, juice and many more.
The operator can easily access the bottle or bag filling machine, Because this device, presented the instruction manual to operator for repair, maintenance. In this way, the packing roll is first placed in the machine and then in a bag, filling the elements and finally sealed by the sealer.
They are a creative type of machinery that is useful for home and business purposes. These machines are used to pack various types of products such as food, electronics and even important documents and Available in several different models and used in large industrial units.
Made of stainless steel, these devices are suitable for semi-liquid and full liquid products
These semi-automatic and fully automatic machines are used to fill and close the bottle cap.
The filling system of these devices is multipurpose. A device for a wide range of adaptable and customizable products. It is easy to use and clean and has high standards.
This machine can be used to fill and close the plastic tube cap. It is also used for semi-liquid products with special seal temperatures and clamps. These devices are designed to fill products such as food products, cosmetics and pharmaceuticals.
It is designed to fill liquids such as milk and water that can also fill in semi-liquid products such as jam, mayonnaise, butter, syrup, cream and some similar products. Filling machine and mug seal are available in 2 different types Which are semi-automatic and automatic. These devices are precise and reliable and have continuous, non-stop operation.
He took the corn and the forage out of the soil and packed it into big rolls, Then, using white nylon sheets, roll and wrap the rolls . Then they put the packs on the floor in the final step. The forages are packaged in high quality materials with the help of this machine, so the freshness of the forage is guaranteed.
Labeling is very important for a product like other packaging processes
A label is capable of capturing consumers, providing information about the product and allowing consumers to identify each product differently from other products.
Product labeling can be hidden or placed on top, bottom, front and back of the product, meaning the label can be printed and applied to the product.
Labeling machines, like all other packaging machines, have different shapes depending on the type of application. Like bottle packaging machines, labeling equipment can also be used for small-scale packaging or for large-scale, high-speed packaging.
Is a plastic wrap method that provides more support when moving products , Wraps around the packages in full pallets. When the pallets are fully packed and ready to be shipped, the wrapping wraps around the pallet and all the boxes. The machine creates a solid plastic layer around the boxes and pallets that hold them firmly in place. They can be used for packaging large pallets.
To read more articles from the site Arya Sanat Asrar See here.
Forage corn should be cut to 0.5-1.5 inches. Particles of this size can be packed more tightly into silos and are more tasty to cattle.
With a second cut, Green corn can be made with very good cuts. Doing so will increase the amount of dry matter that can be stored in a silo. But well-cuted forage maize is less tasty and shows less fat in the experiments. While this forage is the main source of feed for dairy cows.
Add water to corn forage in dry bestial
If the forage corn is too dry, You may need to add water to create air impermeable conditions.
As a general rule To increase the moisture content by 1% Add 4 gallon of water to each ton of corn.
A classy cow can eat up to 30 kg of forage maize a day. To ensure that cow’s milk does not smell of corn, feed the cow after milking or at least 3 hours before.
Forage maize must be tightly packed to minimize oxygen content, otherwise it will break down.
Corn enters the silo and goes into storage following the four main steps:
Pre-packing, which happens a few days after filling the silo And there is some loss of breath and dry matter (DM) But it stops.
Fermentation, which occurs over a period of several weeks its PH drops of DM lost more But the cellulose is decomposed and aerobic respiration stops.
Penetration: Penetration allows some oxygen and allows microbial respiration. Existing carbohydrates are destroyed in the way of heat and gas.
Emptying, which leaves the surfaces unprotected, causes additional damage, increasing the amount of damage.
1-Due to the segmentation of the weighing section from product press, the packaging speed of the machine has Increased to 3.5 packs per minute.
2-Due to separation of press parts from sewing and packaging, Excess water is completely evacuated from corn And after the packing step is done which This makes it important to prevent the formation Corruption of corn and increase the shelf-life of the product.
3-In the design and manufacture of the new MG device , the bottom of the device is a press-fitting machine that pushes the package before stitching, so that the air is completely drained and then sewn, which will improve the product and product durability.
4-The sewing system is mainly of thermal type in packaging machines Which was vertical on the previous device Which is sometimes due to the pressure of the sewing area during packing, causing problems such as the reduction of stiffness and the safety factor of the sewing point Which causes the rupture and penetration of the air in the course of time Which leads to corruption of product
which This problem was resolved with making the horizontal packaging system in the new device And the system is designed to cool down the sewing area during the packaging and exit of the machine, and no problems occur.
5-Optimized PLC system instead of LOGO in the control system and use the touch system in control instead of the keyboard.
6-Using the sensor instead of the microswitch (despite the moisture in the device there is a possibility of failure for the microswitch)
7-Using 24V instead of 360V in sewing and electrodelectric strips
8-Securing dangerous and sensitive points of the MG device with metallic guards
9-Use the conveyor system at the bottom of the MG device to transport the packages to the warehouse